Zirconium

Zirconium is a chemical element with symbol Zr and atomic number 40. The name of zirconium is taken from the name of the mineral zircon, the most important source of zirconium. The word zircon comes from the Persian word zargun زرگون, meaning "gold-colored". It is a lustrous, grey-white, strong transition metal that resembles hafnium and, to a lesser extent, titanium. Zirconium is mainly used as a refractory and opacifier, although it is used in small amounts as an alloying agent for its strong resistance to corrosion. Zirconium forms a variety of inorganic and organometallic compounds such as zirconium dioxide and zirconocene dichloride, respectively. Five isotopes occur naturally, three of which are stable. Zirconium compounds have no known biological role.

Characteristics

Zirconium is a lustrous, greyish-white, soft, ductile and malleable metal which is solid at room temperature, though it becomes hard and brittle at lower purities. In powder form, zirconium is highly flammable, but the solid form is far less prone to ignition. Zirconium is highly resistant to corrosion by alkalis, acids, salt water and other agents. However, it will dissolve in hydrochloric and sulfuric acid, especially when fluorine is present. Alloys with zinc become magnetic below 35 K.

Zirconium's melting point is 1855 °C (3371 °F), and its boiling point is 4371 °C (7900 °F). Zirconium has an electronegativity of 1.33 on the Pauling scale. Of the elements within d-block, zirconium has the fourth lowest electronegativity after yttrium, lutetium and hafnium.

At room temperature zirconium exhibits a hexagonally close packed crystal structure, α-Zr, which changes to β-Zr a body-centered cubic crystal structure at 863 °C. Zirconium exists in the β-phase until the melting point.

Isotopes

Naturally occurring zirconium is composed of five isotopes. ⁹⁰Zr, ⁹¹Zr, ⁹²Zr and ⁹⁴Zr are stable. ⁹⁴Zr can undergo double beta decay (not observed experimentally) with a half-life of more than 1.10×10¹⁷ years. ⁹⁶Zr has a half-life of 2.4×10¹⁹ years, making it the longest-lived radioisotope of zirconium. Of these natural isotopes, ⁹⁰Zr is the most common, making up 51.45% of all zirconium. ⁹⁶Zr is the least common, comprising only 2.80% of zirconium.

Twenty-eight artificial isotopes of zirconium have been synthesized, ranging in atomic mass from 78 to 110. ⁹³Zr is the longest-lived artificial isotope, with a half-life of 1.53×10⁶ years. ¹¹⁰Zr, the heaviest isotope of zirconium, is also the shortest-lived, with an estimated half-life of only 30 milliseconds. Radioactive isotopes at or above mass number 93 decay by β^âˆ', whereas those at or below 89 decay by β⁺. The only exception is ⁸⁸Zr, which decays by ε.

Five isotopes of zirconium also exist as metastable isomers: ^83mZr, ^85mZr, ^89mZr, ^90m1Zr, ^90m2Zr and ^91mZr. Of these, ^90m2Zr has the shortest half-life at 131 nanoseconds. ^89mZr is the longest lived with a half-life of 4.161 minutes.

Occurrence

Zirconium has a concentration of about 130 mg/kg within the Earth's crust and about 0.026 μg/L in sea water. It is not found in nature as a native metal, reflecting its intrinsic instability with respect to water. The principal commercial source of zirconium is the silicate mineral, zircon (ZrSiO₄), which is found primarily in Australia, Brazil, India, Russia, South Africa and the United States, as well as in smaller deposits around the world. 80% of zircon mining occurs in Australia and South Africa. Zircon resources exceed 60 million tonnes worldwide and annual worldwide zirconium production is approximately 900,000 tonnes. Zirconium also occurs in more than 140 other minerals, including the commercially useful ores baddeleyite and kosnarite.

Zr is relatively abundant in S-type stars, and it has been detected in the sun and in meteorites. Lunar rock samples brought back from several Apollo program missions to the moon have a quite high zirconium oxide content relative to terrestrial rocks.

Production

Zirconium is a by-product of the mining and processing of the titanium minerals ilmenite and rutile, as well as tin mining. From 2003 to 2007, zircon prices have steadily increased from $360 to $840 per tonne.

Upon being collected from coastal waters, zircon-containing sand is purified by spiral concentrators to remove lighter materials, which are then placed back into the water safely, as they are all natural components of beach sand. Using magnetic separation, the titanium ores ilmenite and rutile are removed.

Most zircon is used directly in commercial applications, but a few percent is converted to the metal. Most Zr metal is produced by the reduction of the zirconium(IV) chloride with magnesium metal in the Kroll process. Commercial-quality zirconium for most uses still has a content of 1% to 3% hafnium. This contaminant is unimportant except in nuclear applications. The resulting metal is sintered until sufficiently ductile for metalworking.

Separation of zirconium and hafnium

Commercial zirconium metal typically contains 1â€"2.5% of hafnium, which is not problematic because the chemical properties of hafnium and zirconium are similar. Their neutron-absorbing properties differ strongly, however, necessitating the separation of hafnium from zirconium for applications involving nuclear reactors. Several separation schemes are in use. The liquid-liquid extraction of the thiocyanate-oxide derivatives, exploits the slightly greater solubility of the hafnium derivative in methyl isobutyl ketone vs water. This method is used mainly in United States. Zr and Hf can also be separated by fractional crystallization of potassium hexafluorozirconate (K₂ZrF₆), which is less soluble in water than the analogous hafnium derivative. Fractional distillation of the tetrachlorides, also called extractive distillation, is used primarily in Europe. A quadruple VAM (vacuum arc melting) process, combined with hot extruding and different rolling applications is cured using high-pressure high-temperature gas autoclaving, resulting in reactor-grade zirconium that is about 10 times more expensive than the hafnium-contaminated commercial grade. The separated hafnium can be used for control rods of the reactor. The separation of hafnium is especially important for nuclear applications since Hf has very high neutron absorption cross-section, 600 times higher than zirconium, and therefore has to be removed for reactor applications.

Compounds

Like other transition metals, zirconium forms a wide range of inorganic compounds and coordination complexes. In general, these compounds are colourless diamagnetic solids wherein Zr has the oxidation state IV+. Far fewer Zr(III) compounds are known, and Zr(II) is very rare.

Oxides, nitrides and carbides

The most common oxide is zirconium dioxide, ZrO₂, also referred to as zirconia. This colourless solid has exceptional fracture toughness and chemical resistance, especially in its cubic form. These properties make zirconia useful as a thermal barrier coating, although it is also a common diamond substitute. Zirconium tungstate is an unusual substance in that it shrinks in all directions when heated, whereas most other substances expand when heated. Zirconyl chloride is a rare water-soluble zirconium complex, it has the relatively complicated formula [Zr₄(OH)₁₂(H₂O)₁₆]Cl₈.

Zirconium carbide and zirconium nitride are refractory solids. The carbide is used to make drilling tools and cutting edges. Zirconium hydride phases are also known.

Halides and pseudohalides

All four common halides are known, ZrF₄, ZrCl₄, ZrBr₄, ZrI₄. All have polymeric structures and are far less volatile than the corresponding monomeric titanium tetrahalides. All tend to hydrolyse to give the so-called oxyhalides and dioxides. The corresponding tetraalkoxides are also known. Unlike the halides, the alkoxides dissolve in nonpolar solvents. Dihydrogen hexafluorozirconate is used in the metal finishing industry as an etching agent to promote paint adhesion.

Organic derivatives

Organozirconium chemistry is the study of compounds containing a carbon-zirconium bond. The first such compound was zirconocene dibromide ((C₅H₅)₂ZrBr₂), reported in 1952 by Birmingham and Wilkinson. Schwartz's reagent, prepared in 1970 by P. C. Wailes and H. Weigold, is a metallocene used in organic synthesis for transformations of alkenes and alkynes. Zirconium is also a component of some Ziegler-Natta catalysts, used to produce polypropylene. This application exploits the ability of zirconium to reversibly form bonds to carbon. Most complexes of Zr(II) are derivatives of zirconocene, one example being (C₅Me₅)₂Zr(CO)₂.

History

The zirconium-containing mineral zircon and related minerals (jargoon, hyacinth, jacinth, ligure) were mentioned in biblical writings. The mineral was not known to contain a new element until 1789, when Klaproth analyzed a jargoon from the island of Ceylon (now Sri Lanka). He named the new element Zirkonerde (zirconia). Humphry Davy attempted to isolate this new element in 1808 through electrolysis, but failed. Zirconium metal was first obtained in an impure form in 1824 by Berzelius by heating a mixture of potassium and potassium zirconium fluoride in an iron tube.

The crystal bar process (also known as the Iodide Process), discovered by Anton Eduard van Arkel and Jan Hendrik de Boer in 1925, was the first industrial process for the commercial production of metallic zirconium. The process involves the formation and subsequent thermal decomposition of zirconium tetraiodide. This method was superseded in 1945 by the much cheaper Kroll process developed by William Justin Kroll, in which zirconium tetrachloride is reduced by magnesium:

ZrCl₄ + 2 Mg â†' Zr + 2 MgCl₂

Applications

Approximately 900,000 tonnes of Zr ores were produced commercially in 1995, mostly as zircon.

Compounds

The great majority of zircon is used directly in a variety of high temperature applications. This material is refractory and hard, as well as resistant to chemical attack. Because of these properties, zircon finds many applications, few of which are highly publicized. Its main use is as an opacifier, conferring a white, opaque appearance to ceramic materials. Because of its chemical resistance, zircon is also used in aggressive environments, such as moulds for molten metals. Zirconium dioxide (ZrO₂) is used in laboratory crucibles, metallurgical furnaces, as a refractory material, and it can be sintered into a ceramic knife. Zircon (ZrSiO₄) is cut into gemstones for use in jewelry.

Metal

A small fraction of the zircon is converted to the metal, which finds various niche applications. Because of zirconium's excellent resistance to corrosion, it is often used as an alloying agent in materials that are exposed to aggressive environments, such as surgical appliances, light filaments and watch cases. The high reactivity of zirconium toward oxygen, apparent only at high temperatures, is the basis of some specialised applications as explosive primers and as getters in vacuum tubes. The same behavior is probably the basis of the use of Zr nano-particles as pyrophoric material in explosive weapons such as the BLU-97/B Combined Effects Bomb for incendiary effect.

Nuclear applications

Cladding for nuclear reactor fuels consumes about 1% of the zirconium supply. For this purpose, it is mainly used in the form of zircaloys. The benefits of Zr alloys is their low neutron-capture cross-section and good resistance to corrosion under normal service conditions. The development of efficient methods for the separation of zirconium from hafnium was required for this application.

One disadvantage of zirconium alloys is their reactivity toward water at high temperatures leading to the formation of hydrogen gas and to the accelerated degradation of the fuel rod cladding:

Zr + 2 H₂O â†' ZrO₂ + 2 H₂

This exothermic reaction is very slow below 100 °C, but at temperature above 900 °C the reaction is rapid. Most metals undergo similar reactions. The redox reaction is relevant to the instability of fuel assemblies at high temperatures. This reaction was responsible for a small hydrogen explosion first observed inside the reactor building of Three Mile Island nuclear power plant in 1979, but then, the containment building was not damaged. The same reaction occurred in the reactors 1, 2 and 3 of the Fukushima I Nuclear Power Plant (Japan) after the reactors cooling was interrupted by the earthquake and tsunami disaster of March 11, 2011 leading to the Fukushima I nuclear accidents. After venting of hydrogen in the maintenance hall of these three reactors, the explosive mixture of hydrogen with air oxygen detonated, severely damaging the installations and at least one of the containment buildings. To avoid explosion, the direct venting of hydrogen to the open atmosphere would have been a preferred design option. Now, to prevent the risk of explosion in many pressurized water reactor (PWR) containment buildings, a catalyst-based recombinator is installed to rapidly convert hydrogen and oxygen into water at room temperature before the explosivity limit is reached.

Space and aeronautic industries

Materials fabricated from zirconium metal and its oxide (ZrO₂) are used in space vehicle parts for their resistance to heat. Zirconia is also a component in some abrasives, such as grinding wheels and sandpaper.

High temperature parts such as combustors, blades and vanes in jet engines and stationary gas turbines are to an increasing extent being protected by thin ceramic layers. These ceramic layers are usually composed of a mixture of zirconia and yttria.

Positron emission tomography cameras

The isotope ⁸⁹Zr has been applied to the tracking and quantification of molecular antibodies with positron emission tomography (PET) cameras (a method called "immuno-PET"). Immuno-PET has reached maturity in terms of technical development and is now entering the phase of wide-scale clinical applications. Until recently, radiolabeling with ⁸⁹Zr was a complicated procedure requiring multiple steps. In 2001â€"2003 an improved multistep procedure was developed using a succinylated derivative of desferrioxamine B (N-sucDf) as a bifunctional chelate, and a better way of binding ⁸⁹Zr to mAbs was reported in 2009. The new method is fast, consists of only two steps, and uses two widely available ingredients: ⁸⁹Zr and the appropriate chelate.

Biomedical applications

Zirconium-containing compounds are used in many biomedical applications including dental implants and other restorative practices, knee and hip replacements, and middle-ear ossicular chain reconstruction.

Zirconium binds urea, a property that has been utilized extensively to the benefit of patients with chronic kidney disease. For example, zirconium is a primary component of the sorbent column dependent dialysate regeneration and recirculation system known as the REDY system, which was first introduced in 1973. More than 2,000,000 dialysis treatments have been performed using the sorbent column in the REDY system. Although the REDY system fell out of favor in the 1990s because of less expensive alternatives, new sorbent-based dialysis systems are being evaluated and approved by the U.S. Food and Drug Administration (FDA). Renal Solutions, which was acquired by Fresenius in 2008, developed the DIALISORB technology, which is a portable, low water dialysis system. Also, developmental versions of a Wearable Artificial Kidney have incorporated sorbent-based technologies (e.g., Xcorporeal, which was acquired by Fresenius in 2010).

A zirconium compound (ZS-9) is under investigation for oral therapy in the treatment of hyperkalemia (elevated serum potassium levels). ZS-9 is a highly selective oral sorbent designed specifically to trap potassium ions over other ions throughout the gastrointestinal tract. In a randomized, double-blind, placebo-controlled phase 3 clinical trial, patients with hyperkalemia received one of four doses of ZS-9 or placebo three times daily for 2 days, and patients whose potassium was normalized received ZS-9 or placebo once daily for 12 additional days. Results showed that ZS-9 given three times daily resulted in significantly greater reductions in potassium than placebo, and once daily ZS-9 was able to maintain significant reductions in serum potassium compared with placebo. ZS-9 was well-tolerated at all doses, with comparable overall adverse event and gastrointestinal adverse event rates between the placebo and ZS-9 treated patients.

Defunct applications

Zirconium carbonate (3ZrO₂·CO₂·H₂O) was used in lotions to treat poison ivy but was discontinued because it occasionally caused skin reactions.

Safety

Although zirconium has no known biological role, the human body contains, on average, 250 milligrams of zirconium, and daily intake is approximately 4.15 milligrams (3.5 milligrams from food and 0.65 milligrams from water), depending on dietary habits. Zirconium is widely distributed in nature and is found in all biological systems, for example: 2.86 μg/g in whole wheat, 3.09 μg/g in brown rice, 0.55 μg/g in spinach, 1.23 μg/g in eggs, and 0.86 μg/g in ground beef. Further, zirconium is commonly used in commercial products (e.g. deodorant sticks, aerosol antiperspirants) and also in water purification (e.g. control of phosphorus pollution, bacteria- and pyrogen-contaminated water).

Short-term exposure to zirconium powder can cause irritation, but only contact with the eyes requires medical attention. Persistent exposure to zirconium tetrachloride resulted in increased mortality in rats and guinea pigs and a decrease of blood hemoglobin and red blood cell in dogs. However, in a study of 20 rats given a standard diet containing ~4% zirconium oxide, there were no adverse effects on growth rate, blood and urine parameters, or mortality. The U.S. Occupational Safety and Health Administration recommends a 5 mg/m³ time weighted average limit and a 10 mg/m³ short-term exposure limit for air dust. However, zirconium is not considered an industrial health hazard. Furthermore, reports of zirconium-related adverse reactions are rare and, and in general, rigorous cause-and-effect relationships have not been established. There is no evidence that zirconium is carcinogenic or genotoxic.

See also

• Zirconium alloys
• Zirconia light

References

External links

• Chemistry in its element podcast (MP3) from the Royal Society of Chemistry's Chemistry World: Zirconium
• Zirconium at The Periodic Table of Videos (University of Nottingham)

Share on Google Plus

About Unknown

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.