Silicone rubber is an elastomer (rubber-like material) composed of siliconeâ€"itself a polymerâ€"containing silicon together with carbon, hydrogen, and oxygen. Silicone rubbers are widely used in industry, and there are multiple formulations. Silicone rubbers are often one- or two-part polymers, and may contain fillers to improve properties or reduce cost. Silicone rubber is generally non-reactive, stable, and resistant to extreme environments and temperatures from -55 °C to +300 °C while still maintaining its useful properties. Due to these properties and its ease of manufacturing and shaping, silicone rubber can be found in a wide variety of products, including: automotive applications; cooking, baking, and food storage products; apparel such as undergarments, sportswear, and footwear; electronics; medical devices and implants; and in home repair and hardware with products such as silicone sealants.
Curing
In its uncured state, silicone rubber is a highly-adhesive gel or liquid. In order to convert to a solid, it must be cured, vulcanized, or catalyzed. This is normally carried out in a two-stage process at the point of manufacture into the desired shape, and then in a prolonged post-cure process. It can also be injection molded.
Silicone rubber may be cured by a platinum-catalyzed cure system, a condensation cure system, a peroxide cure system, or an oxime cure system. For platinum catalyzed cure system, the curing process can be accelerated by adding heat or pressure.
Addition cure system
In a platinum-based silicone cure system, also called an addition system (because platinum is added to the system as a catalyst and simultaneously there are no byproducts) two separate components must be mixed to catalyze the polymers: the one component contains a platinum complex which must be mixed with the second, a hydride- and a vinyl-functional siloxane polymer, creating an ethyl bridge between the two. Such silicone rubbers cure quickly, though the rate of or even ability to cure is easily inhibited in the presence of elemental tin, sulphur, and many amine compounds. Dow Corning produced a product called Silastic Rx which is a platinum-cured tubing used in the medical industry. This platinum-based system has many merits, such as almost no shrinkage (not more than 0.1%), high chemical resistance to aggressive components of some types of resins, good tear strength, high degree of precision in reproduction, high dimensional stability over time and non-deformability, high resistance to high temperatures and aging, excellent non-stick effect and good grade (environmental, odorless and nontoxic).
Condensation-based system
In a condensation system, also called a tin-based cure system and an RTV (room-temperature vulcanizing) system, an alkoxy crosslinker exposed to ambient humidity (i.e., water) experiences a hydrolysis step and is left with a hydroxyl group. This group then participates in a condensation reaction with another hydroxyl group attached to the actual polymer. A tin catalyst is not necessary for the reaction to occur, though it increases the rate of the reaction and therefore decreases the cure time. No mixing is required for the reaction to take place. Such a system will cure on its own at room temperature and (unlike the platinum-based system) is not easily inhibited by contact with other chemicals, though the process may be affected by contact with some plastics or metals and may not take place at all if placed in contact with already-cured silicone compounds. It may take as long as a week for the system to cure fully, and as the system requires some water from the atmosphere in order to cure, there is a risk of the surface layers curing enough to seal the lower layers away from the air, resulting in a fluid pocket of uncured and uncurable silicone (this not a risk for addition-based systems). Acetoxy tin condensation is one of the oldest cure chemistries used for curing silicone rubber, and is the one used in household bathroom caulk. The smell of vinegar in the form of acetic acid is the usual indicator that the reaction is incomplete. Non-acid-producing formulations also exist which have a shorter shelf-life, however, and reduced adhesion when finally cured.
Once fully cured, condensation systems are effective as molds for casting polyurethane, epoxy and polyester resins, waxes, gypsum, and low-temperature metals such as lead. They are typically very flexible and have a high tear strength. They do not require the use of a release agent.
Peroxide-based system
Peroxide curing is widely used for curing silicone rubber. The curing process leaves behind byproducts, which can be an issue in food contact and medical applications. However, these products are usually treated in a postcure oven which greatly reduces the peroxide breakdown product content. One of the two main peroxides used, dicumyl peroxide, has principle breakdown products of acetophenone and phenyl-2-propanol. The other is dichlorobenzoyl peroxide, whose principle breakdown products are dichlorobenzoic acid and dichlorobenzene.
History
The first silicone elastomers were developed in the search for better insulating materials for electric motors and generators. Resin-impregnated glass fibers were the state-of-the-art materials at the time. The glass was very heat resistant, but the phenolic resins would not withstand the higher temperatures that were being encountered in new smaller electric motors. Chemists at Corning Glass and General Electric were investigating heat-resistant materials for use as resinous binders when they synthesized the first silicone polymers, demonstrated that they worked well and found a route to produce it commercially.
The term "silicone" is actually a misnomer. The suffix -one is used by chemists to denote a substance with a double-bonded atom of oxygen in its backbone. When first discovered, silicone was erroneously believed to have oxygen atoms bonded in this way. In fact, silicone is an inorganic polymer, and the technically correct term for the various silicone rubbers is polysiloxanes or polydimethylsiloxanes.
Corning Glass in a joint venture with Dow Chemical formed Dow Corning in 1943 to produce this new class of materials. As the unique properties of the new silicone products were studied in more detail, their potential for broader usage was envisioned, and GE opened its own plant to produce silicones in 1947 (now Momentive Performance Materials). Wacker Chemie also started production of silicones in Europe in 1947. The Japanese company Shin-Etsu Chemical began mass production of silicone in 1953. The companies mentioned above are now still the main competitors in the oligopoly that comprises the silicone industry.
Properties
Silicone rubber offers good resistance to extreme temperatures, being able to operate normally from âˆ'100 to 300 °C (âˆ'148 to 572 °F). Some properties such as elongation, creep, cyclic flexing, tear strength, compression set, dielectric strength(at high voltage), thermal conductivity, fire resistance and in some cases tensile strength can beâ€"at extreme temperaturesâ€"far superior to organic rubbers in general, although a few of these properties are still lower than for some specialty materials. Silicone rubber is a material of choice in industry when retention of initial shape and mechanical strength are desired under heavy thermal stress or sub-zero temperatures. Organic rubber has a carbon-to-carbon backbone which can leave it susceptible to ozone, UV, heat and other ageing factors that silicone rubber can withstand well. This makes silicone rubber one of the elastomers of choice in many extreme environments.
Silicone rubber is highly inert and does not react with most chemicals. Due to its inertness, it is used in many medical applications including medical implants.
Structure
Polysiloxanes differ from other polymers in that their backbones consist of Si-O-Si units unlike many other polymers that contain carbon backbones. Polysiloxane is very flexible due to large bond angles and bond lengths when compared to those found in more basic polymers such as polyethylene. For example, a C-C backbone unit has a bond length of 1.54Â Ã… and a bond angle of 112Ëš, whereas the siloxane backbone unit Si-O has a bond length of 1.63Â Ã… and a bond angle of 130Ëš.
The siloxane backbone differs greatly from the basic polyethylene backbone, yielding a much more flexible polymer. Because the bond lengths are longer, they can move farther and change conformation easily, making for a flexible material. Polysiloxanes also tend to be chemically inert, due to the strength of the silicon-oxygen bond. Despite silicon being a congener of carbon, silicon analogues of carbonaceous compounds generally exhibit different properties, due to the differences in electronic structure and electronegativity between the two elements; the silicon-oxygen bond in polysiloxanes is significantly more stable than the carbon-oxygen bond in polyoxymethylene (a structurally similar polymer) due to its higher bond energy.
(Polymax 2005)
Special grades
There are many special grades and forms of silicone rubber, including: steam resistant, metal detectable, high tear strength, extreme high temperature, extreme low temperature, electrically conductive, chemical/oil/acid/gas resistant, low smoke emitting, and flame-retardant. A variety of fillers can be used in silicone rubber, although most are non-reinforcing and lower the tensile strength.
Silicone rubber is available in a range or hardness levels, expressed as Shore A or IRHD between 10 and 100, the higher number being the harder compound. It is also available in virtually any colour, and can be colour matched.
Applications
Once mixed and coloured, silicone rubber can be extruded into tubes, strips, solid cord or custom profiles according to the size specifications of the manufacturer. Cord can be joined to make O-rings and extruded profiles can be joined to make seals. Silicone rubber can be moulded into custom shapes and designs. Manufacturers work to set industry tolerances when extruding, cutting or joining silicone rubber profiles. In the UK this is BS 3734, for extrusions the tightest level is E1 and the widest is E3.
Becoming more and more common at the consumer level, silicone rubber products can be found in every room of a typical home. It is used in automotive applications, many cooking, baking, and food storage products, apparel including undergarments, sportswear, and footwear, electronics, to home repair and hardware, and a host of unseen applications.
Freeze-tolerant solar water-heating panels exploit the elasticity of silicone to repeatedly accommodate the expansion of water on freezing, while its extreme temperature tolerance maintain a lack of brittleness below freezing and excellent tolerance of temperatures in excess of 150 °C (302 °F). Its property of not having a carbon backbone, but a chemically robust silicon backbone instead, reduces its potential as a food source for dangerous waterborne bacteria such as Legionella.
Non-dyed silicone rubber tape with an iron-oxide additive (making the tape a red-orange colour) is used extensively in aviation and aerospace wiring applications as a splice or wrapping tape due to its non-flammable nature. The iron-oxide additive adds high thermal conductivity but does not change the high electrical insulation property of the silicone rubber. This type of self-amalgamating tape amalgamates or fuses to itself, so that when stretched and wrapped around cables, electrical joints, hoses and pipes it bonds into a strong seamless rubbery electrically insulating and waterproof layer, although not adhesive.
With the addition of carbon or another conductive substance as a powdered filler, silicone rubber can be made electrically conductive while retaining most of its other mechanical properties. As such it is used for flexible contacts which close on being pressed, used in many devices such as computer keyboards and remote control handsets.
Self-healing
In 2007, silicone rubber formed the matrix of the first autonomic self-healing elastomer. The microcapsule-based material was capable of recovering almost all of the original tear strength. Additionally, this material had improved fatigue properties as evaluated using a torsion-fatigue test.
See also
- Injection molding of liquid silicone rubber
- Forensic engineering
- Forensic polymer engineering
- Medical grade silicone
- RTV silicone
References
Further reading
- Brydson, John (1999) Plastics Materials, Butterworth, 9th Ed
- Lewis, PR, Reynolds, K and Gagg, C (2004) Forensic Materials Engineering: Case Studies, CRC Press
Great Blog About Silicone Rubber. Great Information About Silicone Rubber. Thank You For Sharing Informative blog.
BalasHapus